Can I use the MIGHTY while charging?
Yes. If the MIGHTY is operated while plugged in, the batteries will be bypassed. Therefore, the MIGHTY can be used even with completely drained batteries if it is plugged in and switched on.
Can I use the CRAFTY without the Remote-Control App?
Yes. The CRAFTY is a one-button device. The CRAFTY Remote-Control App is not necessary for operating the vaporizer as this works perfectly with the default settings: basic temperature is 180°C and booster temperature is 195°C. However, with the app you can set the basic and booster temperature, change the LED brightness, switch the vibration signal on and off, read the battery status, reference the operating time, and much more. Click here.
How do I take proper care of the batteries?
You should store the device at standard ambient temperature approx. 20°C. Don’t leave your device in frost or direct sunlight, and always keep it dry. If the device is not used for a long time, you should store it at a battery capacity of between 20 % and 80 %.
When using the device, it is best to drain the batteries until about 20 % capacity, which is one battery bar and then recharge them fully. From time to time, it makes sense to drain them all the way and then recharge them fully; this will adjust the battery capacity and keep the battery gauge correct.
If the MIGHTY is operated while plugged in, the batteries will be bypassed. Therefore, the MIGHTY can be used even with completely drained batteries if it is plugged in and switched on.
If the CRAFTY is operated while plugged in, the batteries will not be bypassed. The discharge current is higher than the current that is used to charge the battery. Therefore, the CRAFTY can only be operated while plugged in if a partial charging has been carried out beforehand. However, this process is stressful for the battery and may shorten the battery life faster.
How is the vapor created?
The MIGHTY, as well as the CRAFTY and the PLENTY, functions with a patented combination of full hot air convection heating and additional conduction so that the air is already heated when it flows into the heated-up Filling Chamber and ensures an immediate and continuous vaporizing. The additional benefit of the heated Filling Chamber is that the material to be vaporized is already heated up and vaporization takes place on the first draw.
How do I exchange the lower Screen?
Remove the lower Filling Chamber Screen out of the Filling Chamber by using a pair of tweezers or a pair of pointed pliers. Insert a new screen and take care that the edges of the screen lock in place into the groove provided.